Motorcycle Parts and Accessories
For Japanese Brand
Bikes
- Accessory Items
- Apparel for Bikers
- Body Parts
- Brake Parts
- Controls
- Chassis
- Liquids
- Drive Parts
- Electrical
- Exhaust Parts
- Fuel System Parts
- Gaskets and Seals
- Motor Parts
- Shop Tools
- Windshields
- Gift Shop
- Ebay Store
- Tools and Tips
- SPECIAL AREAS
- Chopper Stuff
- Sport Bike Stuff
- Cruiser Stuff
- Deals
This is page one for a specialty area that focuses on accessories and items for custom chopper and bobber Japanese motorcycles. Most items can be also found in our main catalog. Click one of the links below to get started.
Headlight
Visors
- Available for 7 inch and 5 3/4 inch headlights.
- Chrome Plated Steel
5 3/4 Inch
7 Inch
Sparto Style
Tail Light
- Cool polished aluminum Sparto style tail light/brake light assembly.
- Comes with a un-drilled four inch long tab for custom mounting license plate or signals.
- The ultimate in vintage tail-light design.
- Uses a dual element incandescent bulb.
51.95
Sparto Style
Tail Light
Black
- Cool polished aluminum Sparto style tail light/brake light assembly.
- Comes with a un-drilled four inch long tab for custom mounting license plate or signals.
- The ultimate in vintage tail-light design.
- Uses a dual element incandescent bulb.
44.95
Slim Cat Eye Tail Light
With License Plate Mount
- 6 1/2 inches long, 1 1/2 inches tall, 1 1/2 inches deep.
- Plastic body with beautiful chrome finish.
- 2 inch wide bolt studs on rear.
- Comes with aluminum license plate mount that can be mounted on a fender or any number of ways.
- Uses a dual element incandescent bulb.
Tail Light Assy
Handlebar Clamp
- This is a beautiful chromed handlebar clamp that fits many early Honda and Kawasaki's.
- Clamp fits most CB350's-GL1100's from '69-'83 and Kawasaki KZ400-1100's '73-'83.
- Comes with mounting bolts.
Chrome Clamp Kit
GT Grips
- OldSchool styling with modern comfort
- Injection-molded Krayton rubber, Made in the USA
- Available in 4 different colors
- For 7/8 inch bars
- Sold in Pairs
Cole Foster
Signature Series
7/8 Grips
- OldSchool styling with modern comfort
- Injection-molded Krayton rubber, Made in the USA
- Available in 3 different colors
- For 7/8 inch bars
- Sold in Pairs
Grand Turismo
Replica Grips
- All rubber grips made to look like "Old School" Grand Turismo Grips popular in the 70's
- For 7/8 inch bars
- Sold in Pairs
Rubber Grips
Vintage Style
Chrome Kawasaki
Gauge Top
Covers Pair
Chrome gauge TOP covers for the early Kawasaki's listed. Made of steel and comes in a beautiful chrome finish. If used with the bottom covers, they make the entire gauge chrome. Also an awesome part to cover dings and damage to a stock gauge bezel. Held into place with a perimeter clamp that anchors to the stainless band in the middle of a stock guage. SOLD AS A PAIR
Fits
KZ650 '77-'80
KZ750 Twin '76-'80
Z1-900 '73-'75
KZ900 '76
KZ1000 '77-'80
Chrome Replacement
Gauge Top
Covers Pair
Chrome gauge TOP covers for the early Honda's listed. Made of steel and comes in a beautiful chrome finish. This set Also an awesome part to cover dings and damage to a stock gauge bezel. Held into place with a perimeter clamp that anchors to the stainless band in the middle of a stock gauge. This set also accommodates side type trip meter knobs (TYPICALLY '78 AND LATER year models). One side will have the (appr 1/2 inch) access hole. If you have a earliest style speedo that has the knob on the bottom you may want to cover the hole. SOLD AS A PAIR
Fits
CX500C Custom '79-'82
GL500 '81-'82
CB550 '74-'78
CB650C Custom '79-'82
GL650 '83
CB750 SOHC All '70-'78
CB750C Custom '80-'82
CB900C Custom '80-'82
GL1100 All '80-'82
GL1100 Standard '83
GL1100 Interstate '83
Replacement Gauge Cups
for Kawasaki
- Made as a direct replacement for the old Kawasaki Gauges
- Beautiful chrome plated steel
- Sold in a Pair
Fits KZ650 '77-'80
KZ750 Twin '76-'80
Z1 KZ900 '73-'76
KZ1000 '77-'80
Pro One
Billet Tear Drop Mirror
- Beautiful Billet Tear drop style mirrors made by Pro One.
- appr 5x2.75 inch mirror surface.
- Comes with two different stem lengths and all the adapters for Honda, Kawasaki, Suzuki, Yamaha, and Harley applications.
- Nice and heavy to absorb shock and make for a clean view with little to no vibration.
- Beautiful chrome finish and great visibility for the size.
- Sold in a Pair
119.95 a PAIR
Pro One
Contour Mirror
- Beautiful Golf Club style mirrors made by Pro One.
- appr 4x1.5 inch mirror surface.
- Comes with two different stem lengths and all the adapters for Honda, Kawasaki, Suzuki, Yamaha, and Harley applications.
- Nice and heavy to absorb shock and make for a clean view with little to no vibration.
- Beautiful chrome finish and great visibility for the size.
- Sold in a Pair
119.95 a PAIR
Maltese Cross Mirrors
with Billet Style Shaft
- Cool looking Maltese Cross mirror with aluminum sculptured shafts and cast aluminum backs.
- Nice and heavy for low vibration and good visibility.
- Mirror is appr 4 inch x 4 inch and 6 inch shafts that sit at a 45 degree angle.
- The best part is they come with the adapters to fit ALL major brands of bikes. Honda, Harley, Kawasaki, Suzuki
- if you have a Yamaha Order the Yamaha Pair
- Sold in Pairs.
With Hon Kaw Suz Harley
Adapters
With Added Yamaha Adapter
Mini Gauges
- Here they are! The original style polished stainless steel bezel and chrome body mini speedometers and mini tachometers with cable drives.
- Speedo's register 140 mph and the tach's register 12000 rpm.
- They have black faces and light up with typical halo lighting with a replaceable bulb.
- The cable hook-up is the same as ALL major Japanese models early to present day.
- Sold individually below and available in different ratios.
- They all are appr 2 1/2 inch diameter (60mm) and are appr 3 inches long bodies.
- For some models you will need to do some research to figure out the proper ratio's needed.
- Handlebar mount clamp also included, but not pictured.
- TACH ONLY AVAILABLE IN BLACK FACE
| Most small Honda's up to
550cc Tach 1:7 Ratio |
|
| Most Honda's 750-1100cc
and Suzuki's Tach 1:4 Ratio |
|
| Most Kawasaki's and
Yamaha's Tach 1:5 Ratio |
|
| Black Face Mini Speedo Speedometer 2:1 Ratio  |
|
| White Face Mini Speedo Speedometer 2:1 Ratio  |
|
| Black Face Mini Speedo Speedometer 2240:60 Ratio  |
|
| White Face Mini Speedo Speedometer 2240:60 Ratio  |
Black face Mini Speedo
with Indicator Lights
- This is a 60 mm size mini speedo made just like the ones sold above this add, with the exception of the addition of 4 indicator lights built in.
- Now you can kill two birds with one stone and have a oil light, neutral light, signal indicator, and high beam indicator built right in!!
Mini Gauge w/4 LED
2:1 Ratio
Mini Gauge w/4 LED
2240:60 Ratio
White face Mini Speedo
with Indicator Lights
- This is a 60 mm size mini speedo made just like the ones sold above this add, with the exception of the addition of 4 indicator lights built in.
- Now you can kill two birds with one stone and have a oil light, neutral light, signal indicator, and high beam indicator built right in!!
Mini Gauge w/4 LED
2:1 Ratio
Mini Gauge w/4 LED
2240:60 Ratio
Vintage
Tail Light
- This is a cool vintage style tail light assembly.
- Base grounded with two hot leads, one for tail and one for brake light.
- Nuts screw onto threads on the back for mounting 60mm center to center.
- Total width appr 3.5 inches and 3 3/16 height, and appr 2 1/2 inches deep.
- Has clear spot in lens on bottom for license plate lighting.
Complete Light
Assembly
Maltese Cross
Tail Light
- The REAL DEAL! Original Style Maltese Cross Tail Light Unit, Dual element tail light assy.
- Chrome plated cast metal body.
- Uses a dual element incandescent bulb.
Complete Light Assy
Lens Only
Classic Tombstone
Tail Light
- This is a cool vintage style tail light assembly.
- Traditional shape and size classic tombstone tail light.
- Heavy cast with beautiful show chrome finish.
- Uses a dual element incandescent bulb.
Complete Light
Assembly
Lucas Style
Tail Light
- This is a cool vintage style tail light assembly.
- Popular small replacement tail light. Appr 4" wide
- Uses a dual element incandescent bulb.
Complete Light
Assembly
Cat Face
Tail Light
- Can be used in place of any Lucas style tail light
- This is for the person who is looking for the ultimate unique tail light.
- It has a cool lens in the shape of a cat's face!
- Why just have a cat eye when you can have the whole face?!
- Uses a dual element incandescent bulb.
Complete Light
Assembly
Chrome Sport
Tail Light
and Mount
- This is a classic style sport tail light/brake light with chrome mount that fits most rear fenders.
- 3 bolt mount and comes with rubber base gasket
- Tab on rear to use for mounting license plate.
- You can also use he Lucas tail light or the cat face light with this unit.
- Comes with the light shown which is the sport version of the Lucas style light
- Uses a dual element incandescent bulb.
Complete Light
Assembly
- This is a cool vintage style tail light assembly.
- 5 inches wide and 2 1/2 inches deep.
- Made of die-cast metal with show-chrome finish.
Classic
Cat Eye Taillight
- 5 inches wide and 2 1/2 inches deep.
- Has ribbed chrome body made of die cast metal.
- Clear lens with red skull.
- Grounded mount with dual element standard tail light bulb.
- Very high quality part with a unique look!
Cat Eye With Skull
Tail Light
Slim Cat Eye
Tail Light
- 6 1/2 inches long, 1 1/2 inches tall, 1 1/2 inches deep.
- Plastic body with beautiful chrome finish.
- 2 inch wide bolt studs on rear.
- This is the ultimate in sleekness.
.
CB750 Drag Pipes
- 4-4 Drag pipes for CB750K Honda's 69-'76 and '77-'78
- FACTORY EXHAUST FLANGES ARE NEEDED FOR INSTALLATION
- For More information about these exhaust CLICK HERE
'69-'76 CB750 Honda
'77-'78 CB750 Honda
- CYCLE Performance Products Inc. Header Wrap
- Withstands heat up to 2000 F Degrees 2 inch wide and 25 ft long and comes with four stainless ties.
- Available in natural as shown or black.
Natural 2" x 25'
With 4 Stainless Ties!
Black 2" x 25'
With 4 Stainless Ties!
Chrome Acorn
Cap Nuts
- We carry these in 3 sizes.
- 10mm thread with 14mm head
- 8mm thread with 12mm head
- 6mm thread with 10mm head
- Also see out Hardware Page for More.
10mm thread
.75 cents each
8mm thread
.60 cents each
6mm thread
.50 cents each
Solo Seat
Small
- Solo Seat 9" wide with universal mount hardware.
- Can be mounted with springs listed below.
- Heavy duty vinyl cover and 16 gauge steel pan
39.95
- Larger Solo Seat Vinyl and riveted cover with heavy 16 gauge steel pan.
- Can be mounted with springs listed below.
- Spring mounts and slotted front mount welded to pan
- Approximately 13 inches wide and 15 inches long.
- Very nice contour makes this a quality solo seat at a great price.
Solo Seat
Larger
Pillion Pad
Small
- Pillion Pad 10 inch x 5 inch x 3 1/4 inch
- Can be mounted directly to a fender top
- Heavy duty Naugahyde vinyl cover with carpeted steel base
- Special Order Item takes extra 2-3 days for Delivery
69.95
Pillion Pad
Large
- Pillion Pad 11 1/2 inch x 6 1/2 inch x 3 1/4 inch
- Can be mounted directly to a fender top
- Heavy duty Naugahyde vinyl cover with carpeted steel base
- Special Order Item takes extra 2-3 days for Delivery
79.95
3 inch
Solo Seat Spring
- Chromed Steel Solo Seat Spring
- Sold individually
- Used for the rear mounting of a solo seat
Sold Each
2 inch
Solo Seat Springs
- Chromed Steel Solo Seat Springs
- Sold as a Pair
- Used for the rear mounting of a solo seat
Sold In Pairs
5 inch
Solo Seat Springs
- Chromed Steel Solo Seat Springs
- Sold as a Pair
- Used for the rear mounting of a solo seat
Sold In Pairs
3 inch
Torsion Type
Solo Seat Springs
- Chromed Steel Torsion Type Solo Seat Springs
- Sold In Pairs
- Used for the rear mounting of a solo seat
Sold In Pairs
Solo Seat
Accessories
- Various accseeories for mounting solo seats
- all parts are 16 gauge or better steel
Universal solo seat spring mount. 7 1/4" and 6 1/2" on
center holes pre- drilled PAINTED BLACK
Universal solo seat front mount. Appr 6 inches long with 1
1/2 inch slot.
CHROME PLATED
Universal solo seat front mount. Appr 4 inches long with 1
1/2 inch slot.
CHROME PLATED
16"X 3.0" Rim
for 40 spoke hubs
- Works with 16" spoke conversion kits for 40 spoke sets Like CB750 Choppers.
- Chrome plated heavy duty steel
- Large opening for rubber stem inner-tubes
- Special order item adds 3-4 business days to delivery time.
16" Rim
Rubber Rim Band
16" Intertube RSV
Side Mount
Tail Light
- Complete side mount assembly with taillight, license plate mount.
- Mounts on left side of axel.
- Uses Lucas style light. (included)
- Uses a dual element incandescent bulb.
Complete Tail Light
Chrome License
Plate Frame
Cast aluminum license plate frame with beautiful chrome plated finish. Classic and simple!
Fits almost any Bike!
License Plate
Fasteners
Various bullet and decrative fasteners that can be used as license plate holders or dozens of other places to mount and finish off items on your bike. All types are cast metal and chrome or gold plated.
Classic Chrome
Bullet
Classic Gold
Bullet
Rocket Bullet
Skull Bullet