Store (317) 634-7550
Mini Gauges
- Here they are! The original style polished stainless steel bezel and chrome body mini speedometers and mini tachometers with cable drives.
- Speedo's register 140 mph and the tach's register 12000 rpm.
- They have black faces and light up with typical halo lighting with a replaceable bulb.
- The cable hook-up is the same as ALL major Japanese models early to present day.
- Sold individually below and available in different ratios.
- They all are appr 2 1/2 inch diameter (60mm) and are appr 3 inches long bodies.
- For some models you will need to do some research to figure out the proper ratio's needed.
- Handlebar mount clamp also included, but not pictured.
- TACH ONLY AVAILABLE IN BLACK FACE
| Most small Honda's up to 550cc Tach 1:7 Ratio | |
| Most Honda's 750-1100cc and Suzuki's Tach 1:4 Ratio | |
| Most Kawasaki's and Yamaha's Tach 1:5 Ratio | |
| Black Face Mini Speedo Speedo 2:1 Ratio | |
| White Face Mini Speedo Speedo 2:1 Ratio | |
| Black Face Mini Speedo Speedo 2240:60 Ratio | |
| White Face Mini Speedo Speedo 2240:60 Ratio |
Black face Mini Speedo
with Indicator Lights
- This is a 60 mm size mini speedo made just like the ones sold above this add, with the exception of the addition of 4 indicator lights built in.
- Now you can kill two birds with one stone and have a oil light, neutral light, signal indicator, and high beam indicator built right in!!
Mini Gauge w/4 LED
2:1 Ratio
Mini Gauge w/4 LED
2240:60 Ratio
White face Mini Speedo
with Indicator Lights
- This is a 60 mm size mini speedo made just like the ones sold above this add, with the exception of the addition of 4 indicator lights built in.
- Now you can kill two birds with one stone and have a oil light, neutral light, signal indicator, and high beam indicator built right in!!
Mini Gauge w/4 LED
2:1 Ratio
Mini Gauge w/4 LED
2240:60 Ratio
Replacement Oil Pressure Sender
Unit for Honda's
- Made as a direct replacement for the older Honda's
- Made to replace OE Part Number 37240-P13-013
- Brand New Replacement, Made in Japan
Fits CB/CM400 All '78-'81
CX500 All '78-'82
GL500 '81-'82
CB550 '74-'78
CB650 All '79-'82
CB750 All '69-'82
CB900 All '80-'82
CBR929 '00-'01
CBR954 '02-'03
CB1000C '83
CBR1000RR '04-'08
VF1000F '84
CBX All '79-'82
GL1000 All '75-'79
CB1100F '83
GL1100 All '80-'83
Chrome Replacement
Gauge Top
Covers Pair
Chrome gauge TOP covers for the early Kawasaki's listed. Made of steel and comes in a beautiful chrome finish. If used with the bottom covers, they make the entire gauge chrome. Also an awesome part to cover dings and damage to a stock gauge bezel. Held into place with a perimeter clamp that anchors to the stainless band in the middle of a stock guage. SOLD AS A PAIR
Fits
KZ650 '77-'80
KZ750 Twin '76-'80
Z1-900 '73-'75
KZ900 '76
KZ1000 '77-'80
Replacement Gauge Cups
for Kawasaki
- Made as a direct replacement for the old Kawasaki Gauges
- Beautiful chrome plated steel
- Sold in a Pair
Fits KZ650 '77-'80
KZ750 Twin '76-'80
Z1 KZ900 '73-'76
KZ1000 '77-'80