Store (317) 634-7550
NGK Plug Cap
45 Degree
- Resistor plug cap made at 45 degree angle- 5K-
- OEM Manufacturer, screws on to the end of wire, no crimping.
- Made to work with OE 7mm type wire
45 Degree
NGK Plug Cap
90 Degree
- Resistor plug cap made at 90 degree angle- 5K-
- OEM Manufacturer, screws on to the end of wire, no crimping.
- Made to work with OE 7mm type wire
90 Degree
NGK Plug Cap
120 Degree
- Resistor plug cap made at 120 degree angle- 5K-
- OEM Manufacturer, screws on to the end of wire, no crimping.
- Made to work with OE 7mm type wire
120 Degree
NGK Plug Cap
Strait
- Resistor plug cap made at Strait angle- 5K-
- OEM Manufacturer, screws on to the end of wire, no crimping.
- Made to work with OE 7mm type wire
Strait
ACCEL Plug Wire
Kit
- All parts needed to replace all four plug wires on your Accel, Dyna, or Andrews high performance coils.
- 8.8 MM yellow plug wires.
- High-conductivity, silver-plated copper woven around stainless steel
- Multi angle plug caps to achieve strait or angle all in one.
- Can be assembled to desired length.
Multi-Angle Kit
4 Cylinder
7mm Plug Wire
OEM Style
- This is the original type of wire used on most motorcycles.
- High quality 7mm Hypalon covered 19 strand tinned copper core.
- You will want to make sure your wire is removable before you purchase it
- Sold per foot, (example...Order Quan 5 get a 5 foot section)
7mm OE Type
Plug Wire