These are kits we assemble in-house for the models and years listed below.
Honda Carb
Kit CM/CB400-450 Twins, CX500, GL500-650
- Exclusive Kit
Carb Kit
Both Carbs
- This kit will contain the parts for BOTH Carbs for some models that
are hard to find carb good kits for typically.
- We have assembled these kits using the same parts we offer
separately.
- All the rubber parts are a NBR Buna rubber or Viton to work more effectively
with new fuels that contain a lot of alcohol additives.
- Kits are available with all the screws for top covers, float bowls,
accelerator pump cap, and air cut-off valve caps.
- The ONLY difference between the two purchasable options below is the type of float needle they come with. This is important to
verify due to the fact you can find bikes that have the earlier carbs installed on the later model years or visa-versa. Closeups of the
VERY different float needle versions are pictured next to each purchase option.
- CB400/450 Twins '79-'86
- CM400/450 Twins '79-'83
- CX500 Twins '78-'82
- GL500 '81-'82
- GL/CX650 '83
- GL500 '81-'82
- The kits will contain the following parts
- 2 - Float Bowl gaskets
- 1 - Accelerator bowl o-ring
- 2 - Float needles
- 2 - Fuel passage plugs
- 2 - Fuel Crossover o-rings
- 2 - Accel Crossover o-rings
- 2 - Fuel Drain screw o-rings
- 2 - Jet needle/Slide limiter cap o-ring
- 2 - Air Screw o-rings
- 2 - Air screw washers
- 2 - Air cut-off cap U-ring
- 17 - Screws for the uses listed in the
descriptions above
Carb Kit 38 piece
With this style float needle
Carb Kit 38 piece
With this style float needle
Honda Carb
Kit CB750 CB900 CB1000C '79-'83
- Exclusive Kit
1979 Kit
'80-'82 Kit
- This kit will contain the parts for ALL 4 Carbs for the models
listed.
- We have assembled these kits using the same parts we offer
separately.
- All the rubber parts are a NBR Buna rubber or Viton to work more effectively
with new fuels that contain a lot of alcohol additives.
- Kits are available with all the screws for top covers, float bowls,
accelerator pump cap, and air cut-off valve caps.
- The ONLY difference between the two purchasable options below is the type of float needle they come with. This is important to
verify due to the fact you can find bikes that have the earlier carbs installed on the later model years or visa-versa. Closeups of the
VERY different float needle versions are pictured next to each purchase option.
- CB750L LTD '79
- CB750K '79
- CB750F '79
- CB750 ALL Models '80-'82
- CB900C Custom '80-'82
- CB900F Super Sport '81-'82
- CB1000C Custom '83
- The kits will contain the following parts
- 4 - Float Bowl gaskets
- 1 - Accelerator bowl o-ring
- 4 - Float needles
- 4 - Fuel passage plugs
- 6 - Fuel Crossover o-rings
- 6 - Accel Crossover o-rings
- 4 - Fuel Drain screw o-rings
- 4 - Jet needle/Slide limiter cap o-ring
- 4 - Air Screw o-rings
- 4 - Air screw washers
- 4 - Air cut-off cap U-ring
- 31 - Screws for the uses listed in the
descriptions above
1979
Carb Kit 76 piece
With this style float needle
1980-1983
Carb Kit 76 piece
With this style float needle
Honda Carb
Kit CB550-750 '77-'78
- Exclusive Kit
Carb Kit
All 4 Carbs
- This kit will contain the parts for ALL 4 Carbs for some models that
are impossible to find carb kits for typically.
- We have assembled these kits using the same parts we offer
separately.
- All the rubber parts are a NBR Buna rubber to work more effectively
with new fuels that contain a lot of alcohol additives.
- Kits are available with or without fuel crossover tube o-rings
- CB550 Fours '78
- CB650 Fours '79-'80
- CB750 Fours '77-'78
- Also CB750 Auto's '76-'78
- The kits will contain the following parts
- 4 - Float Bowl gaskets4 - Float Bowl gaskets
- 4 - Float needles
- 6 - Fuel Crossover o-rings*
- 4 - Fuel Drain screw o-rings
- 4 - Air Screw o-rings
- 4 - Air screw washers
Carb Kit 26pc
As Shown
Carb Kit 20pc
No Crossover O-Rings